Stikked @ k4be.pl

ESPEasy log

z januszspiewa, 4 lata temu, napisane w C#, wyświetlone 376 razy.
URL https://pastebin.k4be.pl/view/cdd34fe1 Udostępnij
Pobierz wklejkę lub Pokaż surowy tekst
  1. ######2020-03-10######
  2. #######0.04.007#######
  3. ######FLASH INFO######
  4. BIN file: esp3d.bin
  5. COM port: (COM5) USB-SERIAL CH340 (Port_#0001.Hub_#0004)
  6. Baud rate: 9600
  7. ! FORCED DOUT ENABLED !
  8. ######POST FLASH######
  9. Unit name: admin
  10. Unit number: 1
  11. Admin password: admin
  12. WiFi SSID 1: AndroidAP7B8A
  13. WiFi password 1: sorz1628
  14. WiFi SSID 2:
  15. WiFi password 2:
  16. IP: 192.168.43.255
  17. ######FLASH LOG######
  18. [esptool.exe -vv -bm dout -cd nodemcu -cb 9600 -cp COM5 -ca 0x00000 -cf "C:\Users\Grzesiek\Downloads\ESPEasy_mega-20200305\bin\esp3d.bin"]
  19. [2020-03-10 19:00:10] esptool v0.4.12 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
  20. [2020-03-10 19:00:10] setting flash mode from qio to dout
  21. [2020-03-10 19:00:10]   setting board to nodemcu
  22. [2020-03-10 19:00:10]   setting baudrate from 115200 to 9600
  23. [2020-03-10 19:00:10]   setting port from  to COM5
  24. [2020-03-10 19:00:10]   setting address from 0x00000000 to 0x00000000
  25. [2020-03-10 19:00:10]   espcomm_upload_file
  26. [2020-03-10 19:00:10]   espcomm_upload_mem
  27. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  28. [2020-03-10 19:00:10] opening bootloader
  29. [2020-03-10 19:00:10] resetting board
  30. [2020-03-10 19:00:10] trying to connect
  31. [2020-03-10 19:00:10]   flush start
  32. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  33. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  34. [2020-03-10 19:00:10]   flush complete
  35. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  36. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  37. [2020-03-10 19:00:10]   read 0, requested 1
  38. [2020-03-10 19:00:10] trying to connect
  39. [2020-03-10 19:00:10]   flush start
  40. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  41. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  42. [2020-03-10 19:00:10]   flush complete
  43. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  44. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  45. [2020-03-10 19:00:10]   read 0, requested 1
  46. [2020-03-10 19:00:10] trying to connect
  47. [2020-03-10 19:00:10]   flush start
  48. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  49. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  50. [2020-03-10 19:00:10]   flush complete
  51. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  52. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  53. [2020-03-10 19:00:10]   read 0, requested 1
  54. [2020-03-10 19:00:10] resetting board
  55. [2020-03-10 19:00:10] trying to connect
  56. [2020-03-10 19:00:10]   flush start
  57. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  58. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  59. [2020-03-10 19:00:10]   flush complete
  60. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  61. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  62. [2020-03-10 19:00:10]   read 0, requested 1
  63. [2020-03-10 19:00:10] trying to connect
  64. [2020-03-10 19:00:10]   flush start
  65. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  66. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  67. [2020-03-10 19:00:10]   flush complete
  68. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  69. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  70. [2020-03-10 19:00:10]   read 0, requested 1
  71. [2020-03-10 19:00:10] trying to connect
  72. [2020-03-10 19:00:10]   flush start
  73. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  74. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  75. [2020-03-10 19:00:10]   flush complete
  76. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  77. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  78. [2020-03-10 19:00:10]   read 0, requested 1
  79. [2020-03-10 19:00:10] resetting board
  80. [2020-03-10 19:00:10] trying to connect
  81. [2020-03-10 19:00:10]   flush start
  82. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  83. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  84. [2020-03-10 19:00:10]   flush complete
  85. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  86. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  87. [2020-03-10 19:00:10]   read 0, requested 1
  88. [2020-03-10 19:00:10] trying to connect
  89. [2020-03-10 19:00:10]   flush start
  90. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  91. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  92. [2020-03-10 19:00:10]   flush complete
  93. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  94. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  95. [2020-03-10 19:00:10]   read 0, requested 1
  96. [2020-03-10 19:00:10] trying to connect
  97. [2020-03-10 19:00:10]   flush start
  98. [2020-03-10 19:00:10]   setting serial port timeouts to 1 ms
  99. [2020-03-10 19:00:10]   setting serial port timeouts to 1000 ms
  100. [2020-03-10 19:00:10]   flush complete
  101. [2020-03-10 19:00:10]   espcomm_send_command: sending command header
  102. [2020-03-10 19:00:10]   espcomm_send_command: sending command payload
  103. [2020-03-10 19:00:10]   read 0, requested 1
  104. [2020-03-10 19:00:10] warning: espcomm_sync failed
  105. [2020-03-10 19:00:10] error: espcomm_open failed
  106. [2020-03-10 19:00:10] error: espcomm_upload_mem failed
  107. [2020-03-10 19:00:10] STOPPED due to 2 errors! (try reset on the unit, then start a new flash attempt)
  108.  

odpowiedź "ESPEasy log"

Tutaj możesz odpowiedzieć na wklejkę z góry

captcha
Wspierane przez Stikked